How to configure network interfaces

In this document, you’ll find instructions on how to configure the primary network interface of senhasegura, essential for accessing the web interface, proxies, and web services.

Configuration command

1. Access the terminal or command prompt of the operating system where the senhasegura is installed.

2. Execute sudo orbit network command to access a series of options to configure the desired network interface.

mt4adm@vmdf-giskard:~$ sudo orbit network 
Usage: orbit network

Network settings tools

Flags:
-h, --help Show context-sensitive help.

-i, --interface=STRING
-a, --address=STRING
-m, --netmask=STRING
-g, --gateway=STRING
--force Force the command execution, never prompt

actions
--show

List current configuration

1. Execute sudo orbit network --show command to display important information such as IP address, subnet mask, and gateway.

mt4adm@vmdf-giskard:~$ sudo orbit network --show
Networking interface status
============================================================================
Interface eth0
MAC Address = 00:15:5d:3e:73:1c
MTU = 1500
Type = ether
IPv4
     Address = 172.17.182.204
     Broadcast = 172.17.182.207
     Gateway =============================================================================
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Ifac
0.0.0.0         172.17.182.193  0.0.0.0         UG    0      0        0 eth0
172.17.182.192  0.0.0.0         255.255.255.240 U     0      0        0 eth0
============================================================================

Configure interface with DHCP

1. Execute sudo orbit network command to configure the interface with DHCP.

mt4adm@vmdf-giskard:~$ sudo orbit network
Use the arrow keys to navigate: ↓ ↑ → ←
? Choose an interface to configure:
▸ eth0

? Network settings:
static
▸ dhcp

? Are you sure you want to proceed? [y/N] y
Done!
No errors reported

Configure interface with static IP

1. Execute sudo orbit network command to configure a static IP.

mt4adm@vmdf-giskard:~$ sudo orbit network
Use the arrow keys to navigate: ↓ ↑ → ←
? Choose an interface to configure:
▸ eth0
? Network settings:
▸ static
dhcp
✔ IP Address: 172.17.182.204
Netmask: 255.255.255.240
Gateway: 172.17.182.193
? Are you sure you want to proceed? [y/N]
Done!
No errors reported

Provide configuration details as command-line arguments

To reduce interaction during network interface configuration, you can provide configuration details as arguments directly on the command line.

mt4adm@vmdf-giskard:~$ sudo orbit network Ask an admin to verify Duo configuration. The following error is: ***"Unable to connect to Duo".
 --interface=eth0 \
 --address=172.17.182.204 \
 --netmask=255.255.255.240 \
 --gateway=172.17.182.193

This command configures the specified interface (eth0) with the provided IP address, subnet mask, and gateway.

Upon executing this command, there may be additional interaction to confirm the action. For example, choosing the type of network configuration (static or DHCP) and confirming whether to proceed with the provided settings.

After confirmation, the system will apply the specified settings, and you’ll see the completion message:

Done!
No errors reported

Thus, the network interface will be configured according to the provided specifications.

Restart the Server

To apply the settings after configuring the network interface, it’s necessary to restart the server.

1. Execute shutdown --reboot command.

mt4adm@vmdf-giskard:~$ sudo orbit network --reboot
Use the arrow keys to navigate: ↓ ↑ → ←
? Choose an interface to configure:
▸ eth0
? Network settings:
static
▸ dhcp
? Are you sure you want to proceed? [y/N] y
Done!
No errors reported
Stopping database service...