How to configure SNMP monitoring
- 1 minute to read
- Print
- DarkLight
- PDF
How to configure SNMP monitoring
- 1 minute to read
- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Use the orbit snmp
command to configure the server that will receive the MIB reading from senhasegura.
mt4adm@vmdf-giskard:~$ sudo orbit snmp --help
Usage: orbit snmp
Simple Network Management Protocol (SNMP) management tools
Flags:
-h, --help Show context-sensitive help.
-c, --community=STRING
-u, --username=STRING SNMPv3 username
-s, --server=STRING Listen server ip address
-a, --allowed-ips=ALLOWED-IPS,...
Allowed servers to query SNMP
-v, --version=2
--force Force the command execution, never prompt
--show
Caution
The following arguments are mandatory:
community:
-c
server:
-s
allowed-ips:
-a
version:
-v
Caution
In addition to these arguments for SNMPv3 it is mandatory to insert username: -u
To configure the list of allowed servers, use the arguments as in the example. The –server
argument must be filled with the IP of the senhasegura interface. The –allowed-ips
argument is filled with the list of servers that can read SNMP.
Configure SNMPv2
mt4adm@vmdf-giskard:~$ sudo orbit snmp -c public -s 192.168.86.86 -a 192.168.86.73 -v 2
? Are you sure you want to proceed? [y/N] y█
Done!
No errors reported
To list the current configuration, use the –show
argument.
mt4adm@vmdf-giskard:~$ sudo orbit snmp --show
SNMP informations
SNMP Listen address = 192.168.86.86
Community public
Allowed IPs
192.168.86.73
SNMPv3 username = N/A
SNMPv3 authentication pass (SHA) = N/A
SNMPv3 encryption pass (AES) = N/A
SNMPv3 level = authpriv
Configure SNMPv3
mt4adm@vmdf-giskard:~$ sudo orbit snmp -c public -s 192.168.86.86 -a 192.168.86.73 -v 3 -u mymonitor
? Are you sure you want to proceed? [y/N] y█
Done!
Run 'orbit snmp --show' to view authentication and encryption settings
Example: snmpwalk -v 3 -u mymonitor -a SHA -A iRYRWHXhMHlY -x AES -X jWSqOdVtXwyz -l authPriv 192.168.86.86
To list the current configuration, use the –show
argument.
mt4adm@vmdf-giskard:~$ sudo orbit snmp --show
SNMP informations
SNMP Listen address = 192.168.86.86
Community
Allowed IPs
192.168.86.73
SNMPv3 username = mymonitor
SNMPv3 authentication pass (SHA) = iRYRWHXhMHlY
SNMPv3 encryption pass (AES) = jWSqOdVtXwyz
SNMPv3 level = authpriv
mt4adm@vmdf-giskard:~$
Was this article helpful?