System parameters - Access Control

Path to access

Caution

All fields are filled in with a default value, recommended by senhasegura. However, you can make modifications as needed.

On senhasegura, in the upper-left corner, click the Grid Menu, represented by the nine squares, and select settings.

In the side menu, select System Parameters > System Parameters > Access Control.

Access Control tab

In the General section

Item	Description
Password Parts*	The number of parts into which the password will be divided for groups with multiple custody. You can choose from 1 to 5. By default: 2
Password display time (s)*	Maximum time in seconds that the password window will be open. Select 0 to not close. By default: 30.
Time expiration reason (min)*	The time that the justification of access to a password is worth. During this period, the user will not need to provide another justification to access the password again. By default: 60.
Time expiration approval (min)*	Standard time that approval of a request will take in minutes. By default: 60.
Approver can change when approval will expire?*	Parameter to allow for the approver to change the approval validity parameter. By default: Yes.
Allow only one group per user?*	Parameter to define whether or not a user can be part of more than one access group. By default: No.
List only approvers with permission?*	Parameter to decide whetherOnly approvers with permission can be listed. By default: No.
Allow an approver to approve their own request?*	Parameter to setWhether an approver can approve the request itself. By default: No.
Allow registry of duplicate credentials?*	Parameter to set whether duplicate credentials can be registered. By default: No.
Allow to register devices with duplicate IP?*	Parameter to set whether it will be allowed to register devices with duplicate IP. By default: Yes.
Process groups individually?*	Parameter to set whether groups can be accessed individually. By default: No.
Allow batch approval?*	Parameter to set whether batch import will be allowed. By default: No.
Requires approval to change user roles?*	Parameter to define whether approval will be required to change user roles. If there are no approvers for User Management, the changes will be applied without approval. By default: Yes.
Force access rule by domain device*	Parameter to disable the most restrictive rule for groups. Each device's request follows the access group configuration of its respective group. By default: Yes.
Make below fields required:	Defines whether it will be mandatory for Users and Approvers to fill in the following fields. By default: Users and Approvers.
Notify requester of result of the request through:	Parameter to set whether the requester will be notified about the request via E-Mail and/or Screen. By default: Email and Screen.
Notify approver of new requests through:	Parameter to set whether the approver will be notified for requests via E-Mail and/or Screen. By default: Email and Screen.
Display name for fields "Governance Code"*	Parameter to set a message to Governance Code. By default: Governance Code.

Item

Description

Password Parts*

The number of parts into which the password will be divided for groups with multiple custody. You can choose from 1 to 5. By default: 2

Password display time (s)*

Maximum time in seconds that the password window will be open. Select 0 to not close. By default: 30.

Time expiration reason (min)*

The time that the justification of access to a password is worth. During this period, the user will not need to provide another justification to access the password again. By default: 60.

Time expiration approval (min)*

Standard time that approval of a request will take in minutes. By default: 60.

Approver can change when approval will expire?*

Parameter to allow for the approver to change the approval validity parameter. By default: Yes.

Allow only one group per user?*

Parameter to define whether or not a user can be part of more than one access group. By default: No.

List only approvers with permission?*

Parameter to decide whetherOnly approvers with permission can be listed. By default: No.

Allow an approver to approve their own request?*

Parameter to setWhether an approver can approve the request itself. By default: No.

Allow registry of duplicate credentials?*

Parameter to set whether duplicate credentials can be registered. By default: No.

Allow to register devices with duplicate IP?*

Parameter to set whether it will be allowed to register devices with duplicate IP. By default: Yes.

Process groups individually?*

Parameter to set whether groups can be accessed individually. By default: No.

Allow batch approval?*

Parameter to set whether batch import will be allowed. By default: No.

Requires approval to change user roles?*

Parameter to define whether approval will be required to change user roles. If there are no approvers for User Management, the changes will be applied without approval. By default: Yes.

Force access rule by domain device*

Parameter to disable the most restrictive rule for groups. Each device's request follows the access group configuration of its respective group. By default: Yes.

Make below fields required:

Defines whether it will be mandatory for Users and Approvers to fill in the following fields. By default: Users and Approvers.

Notify requester of result of the request through:

Parameter to set whether the requester will be notified about the request via E-Mail and/or Screen. By default: Email and Screen.

Notify approver of new requests through:

Parameter to set whether the approver will be notified for requests via E-Mail and/or Screen. By default: Email and Screen.

Display name for fields "Governance Code"*

Parameter to set a message to Governance Code. By default: Governance Code.

In the Mobile app section

Item	Description
Allow use by all users*	Parameter to define whether all users have access to the mobile application. By default: Yes.
Require device approval*	Parameter to define whether it’ll be necessary to request approval from the device being used for access. The App connection request must be approved by an administrator. By default: No.

Item

Description

Allow use by all users*

Parameter to define whether all users have access to the mobile application. By default: Yes.

Require device approval*

Parameter to define whether it’ll be necessary to request approval from the device being used for access. The App connection request must be approved by an administrator. By default: No.

System parameters - Access Control

Path to access

Access Control tab

In the General section

In the Mobile app section

What's Next