Reference for Replication settings

Article summary

Did you find this summary helpful?

Thank you for your feedback

# Replication Settings

In this document, you will find all the information about the Replication Settings menu of the Orbit Web interface.

Access Path

In senhasegura, at the top left corner, click on the Grid Menu, represented by the nine squares, and select Orbit Config Manager.
In the side menu, select Replication > Settings.

Item	Description
Operation Mode	Must be chosen between Standalone, Cluster, External Cluster, and Enable Replication.
Synchronizers	Enable or disable the option to synchronize files.
Sync Timeout (seconds)	Specify in seconds the maximum number of seconds to retry an update on the synchronization table.

Item	Description
Primary Member	Field to add the primary member of the cluster.
Additional Member 1	Field to add additional member 1 of the cluster.
Additional Member 2	Field to add additional member 2 of the cluster.
Additional Member 3	Field to add additional member 3 of the cluster.
Additional Member 4	Field to add additional member 4 of the cluster.
Additional Member 5	Field to add additional member 5 of the cluster.
Arbitration Member	Field to add the arbitration member of the cluster.
Members in Different Datacenters	Enable this field if the cluster members are in different datacenters.
Latency between Members	Choose between Low, Medium, and High, being Low: 0-10ms, Medium: 10-30ms, and High: > 30ms.
Network Segment	This field must be filled with a number between 1 and 9. Nodes from the same datacenter must be configured with the same segment. Leave blank if there is only one node in each datacenter.
Recovery Screen Display Message	Customizable message for display on the recovery screen.
Save	Button to save the changes.

Was this article helpful?

On this page