---
title: "System parameters - Executions"
slug: "executions-system-parameters-executions"
updated: 2026-11-03T14:47:51Z
published: 2026-11-03T14:47:51Z
canonical: "docs.senhasegura.io/executions-system-parameters-executions"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.senhasegura.io/llms.txt
> Use this file to discover all available pages before exploring further.

# System parameters - Executions

This document provides information about the **System parameters** form screen, which refers to the parametrization of the module.

## Path to access

1. On Segura™, in the navigation bar, hover over the **Products menu** and select **Settings**.
2. In the side menu, select **System Parameters > Global > Executions**.

---

          **Attention**

          

All fields are set with a default value, as recommended by Segura™. However, you can customize your session according to your needs.

## Executions tab

| **Item** | **Type** | **Required** | **Descrição** |
| --- | --- | --- | --- |
| **Number of change attempts*** | Quantity input | Yes | Defines the quantity that can be swapped. The values can range from a minimum of 1 to a maximum of 10. Default value: **1**. |
| **Connection timeout (s)*** | Quantity input | Yes | Defines the inactivity time before closing a connection. The values can range from a minimum of 1 to a maximum of 300. Default value: **5**. |
| **Read timeout (s)*** | Quantity input | Yes | Defines the maximum time to read a command response. The values can range from a minimum of 1 to a maximum of 300. Default value: **5**. |
| **Total records per cycle*** | Quantity input | Yes | Number of records that will be swapped per execution cycle. The minimum value is 200 and the maximum is 10000. Default value: **200**. |
| **Interval between attempts (min)*** | Quantity input | Yes | Defines the interval time between execution attempts. The minimum value is 0 and the maximum is 1440. Default value: **0**. |
| **Interval between failed attempts (min)*** | Quantity input | Yes | Defines the minimum time to retry swapping a password after a failed attempt. The minimum value is 30 and the maximum is 10080. Default value: **30**. |