How to configure device categories

The senhasegura platform allows you to register different types of devices from different manufacturers, each with its own specialty and use. This type of registration makes it easier to identify your devices, since you can organize them into categories.

Devices are classified by:

• Model.
• Type.
• Vendor.

How to register a device product

To register a new device template in PAM Core, follow these steps:

1. On senhasegura, in the navigation bar, hover over the Products menu and select Devices.
2. In side menu, select Settings > Products.
3. The listing of device templates will load.
4. In the bottom-right corner, click on +Add.

In the Device Template pop-up window.

Fill in:

1. Name.
2. For Enabled, select Yes.
3. For Type, select the device type.
4. For Vendor, select the manufacturer of this new device.
5. Click the Choose file  button to load an icon to identify the device model.

Save the new template by clicking the Save button.

How to register a device type

To register a new device type in PAM Core, follow these steps:

1. On senhasegura, in the navigation bar, hover over the Products menu and select Devices.
2. In the side menu, select Settings > Types.
3. The listing of device types will load.
4. In the bottom-right corner, click on +New device type.

In the device type pop-up window

1. Fill in a Name.
2. For Enabled, select Yes.
3. Click the Choose file button to load an icon to identify the device model.

To save the new device type, click the Save button.

How to register a vendor

To register a new device vendor in PAM Core, follow these steps:

1. On senhasegura, in the navigation bar, hover over the Products menu and select Devices.
2. In the side menu, select Settings > Vendors.
3. The manufacturer listing will load.
4. In the bottom-right corner, click on +Add.

In the vendor pop-up window

1. Fill in a Name.
2. Under Enabled, select Yes.
3. Click the Choose file button to load an icon to identify the device vendor.

To save the new manufacturer, click the Save button.

How to register a site

To register a new site in PAM Core, follow these steps:

1. On senhasegura, in the navigation bar, hover over the Products menu and select Devices.
2. In the side menu, select Settings > Sites.
3. The site listing will load.
4. In the bottom-right corner, click on +Add.

In the pop-up device site window

1. Fill in a Name.
2. Under Active, select Yes.

To save the new site, click the Save button.

How to register connectors

To register a new network connector in PAM Core, follow these steps:

1. On senhasegura, in the navigation bar, hover over the Products menu and selectDevices.
2. In the side menu, select Settings > Network Connector > Connectors.
3. The list of network connectors will load.
4. In the bottom-right corner, click on +Add.

In the new network connector pop-up window

1. Fill in a Name.
2. Under Enabled, select Yes.

In the authentication tab

Fill in:

1. IP of the connector.
2. Port of the connector.
3. Username of that connector.
4. Password linked to the user.

In the agents tab

In Agents click on the +Add button, and fill in the fields:

1. Name, with the agent’s name.
2. Port, with the agent's port.

To save the new connector, click the Save button.

Do you still have questions? Reach out to the senhasegura Community.